|
Video
|
Bandwidth (50% Modulation)
Luminance: 25Hz to 4.0MHz +0.5/-6.0dB
Chrominace: 25 to 1.5MHz +0.5/-3.0dB
S/N Ratio
Luminance (Component IN/OUT): > 46dB
Chrominance:
K-factor (2T-pulse): < 3%
Y/C Delay: < 20ns
Signal Inputs
Composite Video Input:BNC 1.0Vp-p, 75 ohms, unbalanced sync negative
DUB/Component Input: 12-pin male connetor
Reference Input: BNC 1.0Vp-p, 75 ohms, unbalanced sync negative
Signal Outputs
Video Output 1, 2: BNC 1.0Vp-p, 75 ohms, unbalanced sync negative
DUB/Component Output: 12-pin female connetor
DUB (U-matic) Output:
7-pin female connector
|
|
Audio
|
Audio Performance with Metal partice Tape
Frequency Response: 50Hz to 15kHz +/-3.0dB
S/N Ratio: >50dB
Distortion (at 1kHz) at operational level (+4dBu): <
2%
|
|
Signal Outputs
Audio Line Output CH-1/2: XLR, 3-pin male.
+4dBu, 600 ohm balanced
Audio Monitor Output: XLR, 3-pin male.
Headphones: Stereo Jack
Time Code Output: BNC
2.2Vp-p, 600 ohms, unbalanced
1.2Vp-p, 75 ohms unbalanced
Signal Inputs
Audio Line Input CH-1/2: XLR, 3-pin male.
+4dBu, 600 ohm balanced
Time Code Input: BNC
0.5-18Vp-p, 3k ohms, unbalanced
|
|
General
|
|
Power requirements: AC 90 to 265V, 48 to 64Hz
Power Consumption: 280W
Operating Temperature: 5°C to 40°C
( 41°F to 104°F )
Storage Temperature: -20°C to 60°C
( -4°F to 140°F )
Humidity: Less then 80% (relative humidity)
Mass: 38.7kg (85 lb 5 oz)
Tape Speed: 101.5mm/s
Playback time: 20 minutes maximun with BCT-20K
Fast forward/Rewind time: Less than 90 seconds with BCT-20K
Search speed
Shuttle: still,1/30,1/10,1/5,1/2,1,2,5 & 10 times normal in
forward & reverse directions
Jog: Still to 1 in forward & reverse directions
Dimensions: Approx 427mm (W) x 264mm (H) X 550mm (D)
|
|
Other
|
|
Remote IN/OUT: 9-pin female D connector RS-422
Remote IN/OUT: 36-pin female D connector RS-422
TBC Remote: 15-pin male D connector
Processor adjustment range:
Video level: +-3dB
Chroma level: +-3dB
Black level: 0 to 15 IRE
System SubCarrier Phase: 360°
System sync phase: -1 to 3 microseconds
Y/C delay: +-50 ns
Supplies Accessories
AC Power Cord, Operation manual, Remote control cable RCC-5G (9-pin), 12-pin dubbing cable,
extension boards A, B & C.
|
|
