BVW-75 | ||
Video |
Video performance with Oxide Particle Tape Bandwidth (50% Modulation) Luminance: 25Hz to 4.0MHz +0.5/-6.0dB Chrominance: 25 to 1.5MHz +0.5/-3.0dB S/N Ratio
Y/C Delay: < 20ns Video performance with Metal Particle Tape Bandwidth (50% Modulation) Luminance: 25Hz to 5.5MHz +0.5/-3.0dB Chrominance: 25 to 1.5MHz +0.5/-1.5dB S/N Ratio
Y/C Delay: < 20ns Signal Inputs Video Input 1 Composite BNC 1.0Vp-p, 75Ω, unbalanced sync negative
Component Input 1: BNC x3 DUB/Component Input 2: 12-pin female Sony Connector |
Audio |
Longitudinal Audio Performance with Oxide particle Tape &
without noise reduction
Frequency Response: 50Hz to 15kHz ±3.0dB
S/N Ratio: Distortion (at 1kHz) at operational level (+4dBu): Wow and flutter (DIN 45507): Crosstalk > 60dB (at 1kHz) Longitudinal Audio Performance with Metal particle Tape & noise reduction Frequency Response: 50Hz to 15kHz +1.0/-2.0dB
S/N Ratio: Distortion (at 1kHz) at operational level (+4dBu): Wow and flutter (DIN 45507): Stereo Phase ±20° Crosstalk > 71dB (at 1kHz)
|
FM Audio Performance with Metal particle Tape Frequency Response: 50Hz to 20kHz +0.5/-2.0dB
S/N Ratio: Distortion (at 1kHz) at operational level (+4dBu): Stereo Phase ±10° Crosstalk >70dB (at 1kHz) Signal Inputs Audio Line Input CH-1/2,3/4: XLR, 3-pin male. +4dBu, 600Ω balanced Time Code Input: XLR, 3-pin male 0.5 to 2.8Vp-p, 600Ω, balanced Signal Outputs Audio Line Output CH-1/2,3/4: XLR, 3-pin male. +4dBu, 600Ω balanced Selected Output: XLR, 3-pin male +4dBu, 600Ω balanced Headphones: Stereo Jack, -12dBu, 8Ω unbalanced Time Code Output: XLR, 3-pin male 2.2Vp-p, 600Ω, balanced |
General |
Power requirements: AC 90 to 265V, 48 to 64Hz
Power Consumption: 175W Operating Temperature: Storage Temperature: Humidity: Less then 80% (relative humidity) Mass: 28kg (62 lb) Tape Speed: 101.51mm/s Playback time: More than 100 mins with BCT-90MLA Fast forward time: Less than 90 Secs with BCT-90MLA Search speed
Dynamic Tracking Range: -1 to +2 times normal speed Dimensions: Approx 427mm (W) x 237mm (H) X 520mm (D)
|
Other |
Remote 1 IN/OUT: 9-pin female D connector RS-422
Remote 2: 36-pin connector
TBC Remote: 15-pin male D connector Processor adjustment range, with optional UVR-60P
Supplies Accessories AC Power Cord, Operation manual, Maintenance manual, Remote control cable RCC-5G (9-pin), Extension boards A/B/C |